Description
82% High QE/Wide spectrum
The Dhyana 9KTDI adopts back-illuminated sCMOS technology and has a wide spectral response capability of 200nm-1100nm. Combined with 256-level TDI and cooling technology, it can be better used in low-light imaging fields such as ultraviolet, visible light and near-infrared.
256 TDI Stage Provides High SNR
The Dhyana 9KTDI supports 16~256 levels of TDI (Time Delay Integration) imaging. This can increase the signal integration per unit of time to obtain images with a higher signal-to-noise ratio under limited lighting conditions.
High Throughput up to 510kHz @ 9K
The Dhyana 9KTDI is equipped with the latest CXP-12 high-speed interface. The 9K@510kHz line frequency means a data throughput of 4590Mpixel per second, which is almost 6 times faster than current mainstream 8K line scan cameras, and more than 50 times faster than back-illuminated TDI-CCD cameras.
Specification
| Model | Dhyana 9KTDI |
| Sensor Type | BSI sCMOS TDI |
| Sensor Model | Gpixel GLT5009BSI |
| QE | 38 % @ 266 nm，51% @ 355 nm，82 % @ 550 nm，38 % @ 800 nm |
| Color / Mono | Mono |
| Array Diagonal | 45.4 mm |
| Effective Area | 45.36 mm x 1.28 mm |
| Resolution | 9072 (H) x 256 (V) |
| Pixel Size | 5 μm x 5 μm |
| Operation Mode | TDI, Area |
| TDI Stage | 4, 8, 16, 32, 64, 128, 256 |
| Scan Direction | Forward, Reverse, Trigger control |
| CTE | ≥ 0.99993 |
| Data Bit Depth | 12 bit, 10 bit, 8 bit |
| Full-Well capacity | Typ.:15.5 ke- @ 12 bit, 14 ke- @ 10 bit |
| Dynamic Range | Typ.:68.7 dB @ 12 bit, 63.6 dB @ 10 bit |
| Max. Line Rate | 299 kHZ @ 12 bit, 345 kHZ @ 10 bit, 510 kHZ @ 8 bit |
| Readout Noise | Typ.:7.2 e- @ 12 bit, 11.4 e- @ 10 bit |
| DSNU | Typ.:1.5 e- @ 12 bit；3.5 e- @ 10 bit |
| PRNU | Typ.:0.3% |
| Cooling Method | Air, Liquid, Cooling speed 5 ℃ / min |
| Max. Cooling | 35 ℃ below ambient |
| Binning | 1 x 1，2 x 1，4 x 1，8 x 1 |
| ROI | Support |
| Trigger Mode | Trigger Input, Scan Direction Input |
| Output Trigger Signals | Strobe out |
| Trigger Interface | Hirose, HR10A-7R-4S |
| Timestamp Accuracy | 8 ns |
| Analog Gain | x2 ~ x8, Step 0.5 |
| Digital Gain | x0.5 ~ x10, Step 1 |
| Data Interface | CoaxPress 2.0 (CXP-12) |
| Optical Interface | M72 / User customization |
| Power Supply | 12 V / 8 A |
| Power Consumption | < 60 W |
| Dimensions | 86 mm x 86 mm x 109 mm |
| Weight | 1100 g |
| Software | Samplepro, Matlab |
| SDK | Supports the GenICam standard |
| Operating System | Windows, Linux |
| Operating Environment | Working:Temperature 0~40 °C, Humidity 0~85 % |
| Storage:Temperature 0~60 °C, Humidity 0~90 % |
