Description
Unrivalled UV power
Up to 200 mW efficient output power at 320 nm for demanding applications.
Ultra-stable output
Consistent output power and wavelength with minimal drift over long laser operation and lifetime.
Ultra-narrow linewidth
Precise spectral resolution for fine-tuned interaction and high resolution measurement of materials.
Ultra-low noise
Minimal signal distortion for high clarity measurements and manipulation of materials.
Ultra-stable, high power ultraviolet light for demanding and emerging applications
Skylark NX lasers power applications with ultra-stable output, coherence, and precision performance.
Designed for integration, the lasers are packaged with versatile software control – making them suitable for a wide range of demanding manufacturing, inspection, and analytical applications.
Interferometry, Lithography, Wafer fabrication, High precision optics, Optical grating mastering, Diffraction grating mastering.
Semiconductor inspection, Flow cytometry, Photoluminescence (PL)
Raman spectroscopy, Brillouin scattering, Confocal microscopy, Optical manipulation, Fluorescence
| Output beam parameters | |
| Output power | up to 200 mW |
| Wavelength | 320 nm |
| Spectral bandwidth | ≤ 0.5 MHz |
| Spatial mode | TEM00 |
| Spectral stability | ± 0.2 pm (over 8 hour operation) |
| Coherence length | > 100 m |
| Output power stability | ≤ 2.0 % (over 8 hour operation) |
| Output power noise | ≤ 0.1 % RMS (10 Hz – 10 MHz) |
| Beam divergence | 1.0 mrad, diffraction limited |
| Beam diameter at output aperture | 0.5 – 1.0 mm |
| Beam pointing stability | ≤ 5 μrad/°C |
| Laser head dimensions | |
| L x W | 257 x 150 mm |
| Beam height | 54.2 mm |
| Environmental conditions | |
| Ambient temperature range | 18 – 30 °C |
| Laser head interface stability | ± 1.5 °C |
| Storage | 0 – 50 °C |
| Humidity | 0 – 50 %, non-condensing |
| Laser head | Hermetically sealed |
| Integration features | |
| Plug-in USB Connectivity | Combined Heatsink |
| Versatile Control Software | Remote Diagnostic Support |
| Optional accessories | |
| Heatsink | Fan-assisted air cooled or,Water-cooled thermoelectric chiller |
| External manual power control | 0 – 100 %, continuous |
| Warranty | |
| 12 month warranty | For laser head and controller |
